Craftex CX204N, User Manual

Page: 13 / 35

13
Figure-18 Using masking tape to shim the
extension wing up
TABLE INSERT
Make sure to clean the dust or the dirt on
the table throat before installing the insert.
The dust or dirt can cause the insert to be
out of height alignment.
Place the table insert in the table throat and
make sure it is level with the table surface
secure it by tightening the two screws. See
figure-19.
Figure-19 Installing the table insert
INSTALLING THE BLADE
GUARD
Attach the blade guard to the spreader as
shown in figure-20.
Figure-20 Installing the blade guard
Once the blade guard is attached to the
spreader, slide the blade guard back wards
and push the lock handle down to lock the
blade guard on the spreader as shown in
figure-22.
Figure-21 Securing the blade guard to the
spreader