Craftex CX119, User Manual, Page: 7 / 29

7
SETUP
Before setting up your machine you need to
read and understand this user manual
completely.
The unpainted surfaces of this band saw
are coated with a rust preventive waxy oil
and you will want to remove this before you
begin assembly. Use a solvent cleaner that
will not damage painted surfaces.
UNPACKING
The machine is properly packaged in a
carton for safe transportation. When
unpacking, carefully inspect the crate and
ensure that nothing has been damaged
during transit. Open the crate and check
that the machine is in good condition.
The hardware (screws, washers & etc)
might be shipped in a plastic bag. After the
machine has been un-packed, check that
all loose parts and hardware are present.
LIST OF CONTENTS
A. Table................................................. 1
B. Table Insert ....................................... 1
C. Table Lock Knobs ............................. 2
D. Table Tilt Lock Knob ......................... 1
E. Table Pin........................................... 1
F. Miter Gauge Holder........................... 1
G. Fence Holder .................................... 1
H. Miter Gauge ...................................... 1
I. Fence Assembly ............................... 1
J. Fence Rail......................................... 1
K. Allen Keys ......................................... 2
L. Wrench ............................................. 1
M. Hardware.........................................Bag
WARNING!
CX119 is a heavy machine. Do not over-
exert yourself. Use a fork truck or get the
help of an assistant or a friend.