4
CX116
is designed to cut metal only.
ALWAYS
inspect the blade for any
crack or missing teeth before operating
the band saw.
ALWAYS
ensure that the blade tension
is properly set for the type and width of
blade installed.
NEVER
place your fingers or hands in
the line of cut. If you slip, your hands or
fingers may come into contact with the
blade.
ALL THE GUARDS
must be in place
while operating the band saw to ensure
safety.
ALWAYS
feed the stock smoothly. Do
not force or twist the work-piece while
cutting.
MAKE SURE
before making any
adjustments, the switch is in the “OFF”
position and the cord is un-plugged.
NEVER LEAVE
the band saw
unattended while it is running.
DO NOT
attempt to remove jammed
pieces unless the band saw has come
to a complete stop and the power switch
has been turned to the
OFF
position.
NEVER
turn
ON
the band saw if the
blade is in contact with your stock.
ALWAYS
make certain that the
bearings are properly adjusted to guide
the blade.
MAINTAIN AND SERVICE
your band
saw regularly as instructed in the user
manual.
MAKE SURE
you have read and
understood all the safety instructions in
the manual and you are familiar with
your band saw, before operating the
CX116. If you fail to do so, serious injury
could occur.
WARNING!
The safety instructions given above can not be complete because the environment in
every shop is different. Always consider safety first as it applies to your individual
working conditions
.
CX116 – 5" METAL BAND SAW WITH SWIVEL HEAD
SAFETY INSTRUCTIONS
