8
UNPACKING
The machine is properly packaged and
shipped completely in a box for safe
transportation. When unpacking, carefully
inspect the box and ensure that nothing has
been damaged during transit. Open the box
and check that the machine and the parts
are in good condition.
SETUP
Before setting up your machine you should
read and understand the instructions given
in this manual.
To prevent any damage to the machine
during shipping, the band saw comes with it
is head secured to the base with a bracket.
Remove the two screws using a screw
deriver and remove the bracket securing
the saw head to the base. See figure-2.
Figure-2 Removing the bracket
When setting up your machine, you will
want to find an ideal spot where your band
saw will most likely be positioned most of
the time. Consider your complete work
environment before placing your machine in
the ideal spot.
CLEANING
The unpainted surfaces of this band saw
are coated with a rust preventive waxy oil
and you will want to remove this before you
begin assembly. Use a solvent cleaner that
will not damage painted surfaces.
NOTICE
While doing inventory, if you can not find
any part, check if the part has already
been installed on the machine. Some
parts come pre-assembled for shipping
purposes.
WARNING!
CX109 is a very heavy machine, do not
over-exert yourself. For safe moving
method use fork truck. Failure to do so
could result in serious personal injury
and damage to the machine.
