26
Table Trunnions
Make sure the switch is in the OFF position
and the cord is disconnected from the
power source.
Open the table lock lever and tilt lock knob
and move the table to its maximum 45°
angle and lock the table lever.
Clean the grease and saw dust buildup and
apply a thin coat of all purpose grease to
the trunnions.
Release the table lock lever and tilt the
table up and down a few times to distribute
the grease.
Wipe the excessive grease from the
trunnions and lock the table in its position.
Figure-42 Table trunnions lubrication
