8
MOVING CX102
Your CX102 is provided with two eye bolts
which are installed on the top of the band
saw.
When moving the band saw, place the
lifting hooks through the eye bolts and lift it
using a fork truck.
Figure-3 Moving the band saw
PROPER GROUNDING
Grounding provides a path of least
resistance for electric current to reduce the
risk of electric shock.
CX102 is equipped with a 220-volts single
phase motor.
This appliance is for use on a normal 220-
volt circuit and needs to be wired at the
junction box. To prevent electrical hazards,
have a qualified electrician ensure that the
line is properly wired.
It is strongly recommended not to use
extension cords with your CX102. Always
try to position your machine close to the
power source so that you do not need to
use extension cords.
In case if you really find it necessary to use
an extension cord, make sure the extension
cord does not exceed 50-feet in length and
the cord is 14-gauge to prevent motor
damage.
WARNING
Improper connection of the equipment-
grounding conductor can result in a risk
of electric shock. Check with a qualified
electrician if you are in doubt as to
whether the outlet is properly grounded.
