9
MOBILE BASE
To install the mobile base of your jointer
you need to lay the stand on its side so that
you can have access to the underneath of
the stand. Now take the wheel and install
the wheel to the stand with the help of
washers and bolts provided. See Figure-3
Figure-3 Installing the Mobile Base
The mobile base of your machine should
now be installed and ready to use. You can
now turn the stand back on the ground.
Once the stand is sitting back on solid
ground, you can lock the mobile base in the
place by lifting the foot pedal up. When you
are ready to move your machine again, it is
recommended that you use the in-feed
table as leverage when operating the foot
pedal so that you do not hurt your back (the
machine is heavy, so a strong rigid mobile
base has been provided).
JOINTER BED
Once the stand assembly of your jointer is
on the ground, now it is time to install the
jointer bed to the stand.
Take the jointer bed out of the packaging
and get the help of assistance to lift it onto
the stand. Once the jointer is on the stand,
align the mounting holes on the jointer to
the stand and take the washers and cap
screws to secure the jointer to the stand as
shown in figure-4.
Figure-4 Installing the jointer to the stand
IMPORTANT!
Always keep the mobile base of your
machine locked while doing any cutting
operation.
