Installing the Mobile Base
base of your jointer
ou need to lay the stand on its side so
that you can have access to the
nderneath of the stand. Now take the
k the mobile
ase in the place by lifting the foot pedal
p. When you are ready to move your
achine again, it is recommended that
ou use the in-feed table as leverage
hen operating the foot pedal so that you
o not hurt your back (the machine is
heavy, so a strong rigid mobile base has
To install the mobile
y
u
wheel and install the wheel to the stand
with the help of washers and bolts
provided. (See Figure 1)
Figure 1: Installing Mobile Base
The mobile base of your machine should
now be installed and ready to use. You
can now turn the stand back on the
ground. Once the stand is sitting back on
solid ground, you can loc
b
u
m
y
w
d
been provided).
Installing the Jointer bed to the
Stand
Once the stand assembly of your jointer
is on the ground, now it is time to install
he jointer b
t
ed to the stand. Take the
inter bed out of the packaging and get
e help of assistance to lift it onto the
align the mounting holes on the jointer to
the stand and take the washer
screws to secure the jo
(See Figure 2)
Fig
d
ASSEMBLY
jo
th
stand. Once the jointer is on the stand,
s and cap
inter to the stand.
IMPORTANT for later on.....
Always keep the mobile base of your
machine locked while doing anyf
cutting operation.
ure 2: Installing the jointer to the stan
10
