Craftex CT125, Manual

Page: 12 / 29

12
CT125 – BABY DRUM SANDER 13”
TENSION AND TRACKING
After reasonable usage of the drum sander, the conveyor may slightly stretch
and will require to be tensioned. When tensioning the conveyor belt, it is
important to do so from both sides and not to tension one side more than the
other as this may lead to more tracking problems.
On the side of the conveyor you will find tensioning controls. (see below) Turn
the conveyor adjustment knobs one full turn at a time until the conveyor belt no
longer slips or is off during operation. If you notice that the conveyor is tracking to
one side, turn the machine
OFF , and follow the next few steps for proper
tracking.