background image

 

8

UNPACKING 

 

The machine is properly packaged and 
shipped completely in a carton for safe 
transportation. When unpacking, carefully 
inspect the carton and ensure that nothing 
has been damaged during transit. Open it 
and check that the machine and the parts 
are in good condition. 
 
 

CONTENTS                                QTY      

 

 

A. 

Collector Body & Motor Assembly ......  1 

B. 

Motor Bracket .....................................  1 

C. 

Wall Mounting Bracket .......................  1 

D. 

Dust Collection Bag............................  1 

E. 

Bag Clamp .........................................  1 

F. 

Foam Strip..........................................  1 

G. 

Wrench...............................................  1 

H. 

Hardware Bag ....................................  1 

 
 
While doing inventory, if you can not find 
any part, check if the part has already been 
installed on the machine. Some parts come 
pre-assembled for shipping purposes. 
 
 
 

ASSEMBLY 

 

To assemble your CX416 Wall Mount Dust 
Collector, follow the instructions given 
below. 
 
Align the holes on the motor bracket with 
the holes on the motor base and attach the 
motor bracket to the motor base using four 
bolts provided as shown in figure-1. 
 
 

 
Figure-1 Attaching motor bracket to the 
motor base 
 
 
Take the wall mounting bracket and use it 
as a template on the wall. Mark the 
mounting the holes with a pen and make 
sure the mounting bracket is 44” (minimum) 
from the floor and 6” (minimum) away from 
the wall so that the motor have enough air 
cooling space. 

 
Figure-2 Installing the wall mounting 
bracket 
 
If you are installing the wall mounting 
bracket on a concrete or masonry wall, use 
lag screws with lag shield or anchor studs.   

Summary of Contents for CSX Series














Reviews: