7
PROPER GROUNDING
Grounding provides a path of least
resistance for electric current to reduce the
risk of electric shock.
To prevent electrical hazards, have a
qualified electrician ensure that the line is
properly wired.
This machine is for use on a normal 110
volts circuit. Make sure that the machine is
connected to an outlet having the same
configuration as the plug. If an adaptor
plug is used, it must be attached to the
metal screw of the receptacle.
Figure-1 110-Volts Outlet for CX416
It is strongly recommended not to use
extension cords with your CX416. Always
try to position your machine close to the
power source so that you do not need to
use extension cords.
If it necessary to use an extension cord,
make sure the extension cord does not
exceed 50-feet in length and the cord is 14-
gauge to prevent motor damage. Check for
heat build up periodically.
Your CTX416 should be wired with a 3-
prongs plug fitting a 3 prong grounded
receptacles as shown in figure-1. Do not
remove the grounding prong to fit it into a 2-
pronged outlet. Always check with a
qualified electrician if you are in doubt.
WARNING!
Improper connection of the equipment-
grounding conductor can result in a risk
of electric shock. Check with a qualified
electrician if you are in doubt as to
whether the outlet is properly grounded.
