3
GENERAL SAFETY INSTRUCTIONS
Extreme caution should be used when operating all power tools. Know your
power tool, be familiar with its operation, read through the owner’s manual and
practice safe usage procedures at all times.
CONNECT
your machine only to the
matched and specific power source.
ALWAYS
wear safety glasses
respirators, hearing protection and
safety shoes, when operating your
machine.
DO NOT
wear loose clothing or
jewelry when operating your
machine.
GROUND ALL TOOLS
if tool is
equipped with three-prong plug, it
should be plugged into a three-hole
electrical receptacle. If an adapter is
used to accommodate a two-prong
receptacle, the adapter plug must be
attached to a known ground. Never
remove the third prong.
A SAFE ENVIRONMENT
is
important. Keep the area free of
dust, dirt and other debris in the
immediate vicinity of your machine.
KEEP CHILDREN AND VISITORS
AWAY
. All children and visitors
should be kept a safe distance from
work area.
NEVER
leave a tool unattended
while the machine is in operation.
DON’T OVERREACH
. Keep proper
footing and balance at all times.
DISCONNECT
the power source when
changing drill bits, hollow chisels, router
bits, shaper heads, blades, knives or
making other adjustments or repairs.
SECURE WORK
. Use clamps or a vise
to hold work when practical. It’s safer
than using your hand and frees both
hands to operate tool.
BE ALERT! DO NOT
use prescription
or other drugs that may affect your
ability or judgment to safely use your
machine.
MAINTAIN TOOLS IN TOP
CONDITION
. Keep the blades sharp
and aligned. Follow instructions for
lubricating and changing accessories.
DISCONNECT TOOLS
before servicing
and when changing accessories such as
blades, bits, cutters, etc.
ALWAYS
keep all safety guards in
place and ensure their proper function.
ALWAYS
operate machinery in well
ventilated areas and use wood dust
collection systems whenever possible.
ALWAYS
read and understand the user
manual before starting the machine.
Failure to do so, could result in serious
personal injury or damage to the
machine.