Model 30 Pavement Router Manual
Operating Instructions
Chapter 5
©2018 by Crafco, Inc. All Rights Reserved……………..…………………..……………………..….Operating Instructions 5-12
Moving the Self Propelled Router
5.8.2
Use the self-propelled function only for ease of moving the router from one distressed area to
another.
Table 5-8 Routing with Dust Control Router (continued)
Step
Action
9
At the end of the day remove the cutter head dust shroud and store on the Shroud
Storage Bracket located on top of the cyclone.
WARNING
DO NOT leave the router resting on the seal brushes as they will deform. Excessive
deformation of the seal brushes will hinder the shrouds ability to trap dust behind the
shroud, reducing the efficiency of the dust collector.
Step
Action
1
Reduce engine speed to idle
2
Stand at the operators position
3
Raise the handle slightly so the router is not resting on the skid plate.
4
Pull up on the right hand drive handle to engage the self-propelled drive system and walk
behind the router towards the next distressed area.
5
Release the drive handle when you are ready to stop moving.
Table 5-9 Moving the Self Propelled Router
