Antenna Type
Recommended Antenna
Part Number
Suggested Amount
one GPS-GLONASS
GPS
GPS-GLONASS screw-mount antenna (includes 3M cable)
170651-000
1
3. Connect to a power source.
The Cradlepoint COR IBR1100/IBR1150 includes a two meter direct wire power and GPIO cable (shown below).
The GPIO cable can be attached to the fuse box in a vehicle. For detailed instructions on vehicle installations, see the COR
IBR1100
Vehicle Installation Guide
, available as a PDF in the
Resources
section of the
Cradlepoint COR IBR1100 Series product
page
.
If you want to plug into a wall power outlet, you'll need to purchase a separate wall power adapter: choose between the extended
temperature range (−30 °C to 70 °C) and standard (0 °C to 40 °C) options. Most vehicle installations will use the included direct wire
power/GPIO cable, which can be used to enable the ignition sensing feature, but there is also a car adapter option for plugging into
a vehicle cigarette lighter receptacle.
Wall options
COR IBR1100/IBR1150 extended temperature (−30 °C to 70 °C) 12VDC 2A locking power adapter – requires separate
line cord (Part # 170648-000)
Line cord for North America (Part # 170623-001)
Line cord for EU (Part # 170623-002)
Line cord for UK (Part # 170623-003)
COR 12VDC 2A locking power adapter with 0 °C to 40 °C temperature range – includes US, EU, and UK plugs (Part #
170584-002)
NOTE: Cradlepoint primarily recommends the extended temperature adapter because it covers the COR IBR1100/IBR1150 full
temperature range of −30 °C to 70 °C. Cost-sensitive customers that intend to use the IBR1100/IBR1150 in temperature-controlled
office environments can order the 170584-002 adapter, but it limits the operating temperature range to 0 °C to 40 °C.
Vehicle options
Vehicle locking power adapter for COR (Part # 170635-000)
Two meter locking power and GPIO cable (direct wire) for replacement – included by default (Part # 170585-000)
4. Connect to a computer or other network equipment.
Connect wirelessly to the WiFi broadcast or with an Ethernet cable connected to your computer and plugged into one of the default
Ethernet LAN ports (numbered 1–2).
The default WiFi network name broadcast is “IBR1100-xxx”, where “xxx” is the last three characters of your router’s MAC address
(this is the
SSID
on the product label). To connect to the WiFi, you will need to input the
DEFAULT PASSWORD
when prompted.
The
DEFAULT PASSWORD
is provided on the product label found on the bottom of your router.
NOTE: The product label below is an example only: your
DEFAULT PASSWORD
and
SSID
will be unique.
Knowledge Article
http://knowledgebase.cradlepoint.com/articles/Support/COR-IBR1100-Se...
4 of 7
9/12/2017, 5:55 PM
