CRADLEPOINT
CBR400| USER MANUAL Firmware ver. 3.3.0
© 2011
CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 73
6.7.3
Local Network Interfaces
Each LAN type
—WiFi, Ethernet, and VLAN—has a separate section with configuration options. Unless the default
configuration is sufficient, YOU MUST CONFIGURE EACH INTERFACE SEPARATELY in order to create the desired
interface options for a network. You can then select these interfaces to add to a network in the
Local Network Editor
(see above).
Select from the following tabs:
Wireless (WiFi) Network Settings
Ethernet Port Configuration
VLAN Interfaces
Wireless (WiFi) Network Settings
The CBR400 can broadcast two SSIDs
(service set identifiers
— the names for WiFi
networks). One primary WiFi network is
enabled by default, while you may have
enabled a second guest network when using
the First Time Setup Wizard. You have the
ability to change the settings for either of
these networks.
Wireless Radio:
Enable/Disable. (Default:
Enabled). Leave enabled unless you don‘t
want any WiFi networks broadcast from your router.
Select a WiFi network and click
Edit
to change the settings.
Summary of Contents for CBR400
Page 1: ......
