Cradlepoint CBR400 Product Manual Download

Page: 36 / 158

CRADLEPOINT

CBR400| USER MANUAL Firmware ver. 3.3.0

CRADLEPOINT, INC. PLEASE VISIT

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 34

Router Information

: “

Detailed Info

‖ links to

System Settings

→ Administration



Product:

CBR400



Firmware

: Gives the number of the current firmware version.



Build Date:

Year-month-day-hours-minutes-seconds for the most recent firmware upgrade.



CPU Usage:

Expressed as a percentage.



Up Time:

Total time for current session.



Clock:

Current local date and time.

To check for Firmware upgrades, see

System Settings

→ System Software

Internet

“

Detailed Info

‖ links to

Internet

→ Connection Manager



State:

Connected/Disconnected



Signal Strength:

Expressed as a percentage. (Signal Strength is not included if Ethernet is the WAN type.)



WAN Type:

Ethernet, Modem, or WiFi as WAN.



Connected Time:

The time the current Internet source (WAN) has been connected.



IP Address



Gateway



DNS Servers

For general configuration options, see

Internet

→ Connection Manager

. For more in-depth Internet source

configuration options see the appropriate settings page for your WAN type.



Internet

→ Ethernet Settings



Internet

→ Modem Settings



Internet

→ WiFi as WAN Settings

The IP address and gateway describe your active WAN source.
For DNS server configuration options, see

Network Settings

→ DNS

Summary of Contents for CBR400































































































































































Search results

Summary of Contents for CBR400

Reviews:

Related manuals for CBR400

Brands by name

Popular brands

Cradlepoint CBR400, Product Manual

Search results

Summary of Contents for CBR400

Reviews:

Related manuals for CBR400

Brands by name

Popular brands