Cradlepoint CBA750 Series User Manual Download

Page: 34 / 89

CRADLEPOINT

CBA750 | USER MANUAL Firmware ver. 1.9.0

CRADLEPOINT, INC. PLEASE VISIT

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 32

4.5.2

Packet Settings

Use this section to configure the WAN packet settings.

MTU.

The MTU, or maximum transmission unit, is the size in bytes of the largest packet that can pass through the

network. Enter 0 to set this to the default MTU.

4.5.3

DNS Settings

Use the WAN Configuration sub-menu to configure the network settings for the modem WAN.

DNS Address.

You can acquire a DNS Address automatically from your ISP/Cellular Provider or set the DNS address

manually. Choose from the following options to set the DNS address:



Get Automatically from ISP/Cellular Provider.



Use the Following DNS Servers.

Select this option if you want WiFi clients to access DNS servers that you use

for customized addressing or if you have a local DNS server on your network. Then fill in the following fields:

Primary DNS Server.

Enter the IP address of the server you want as your Primary DNS Server in this field.

Secondary DNS Server.

Enter the IP address of the server you want as your Secondary DNS Server in this

field.

4.5.4

WAN Ping

Enable WAN Ping Respond.

If you enable this feature, the

WAN port of your router will respond to ping requests from the
Internet that are sent to the WAN IP Address.

Summary of Contents for CBA750 Series


























































































Search results

Summary of Contents for CBA750 Series

Reviews:

Related manuals for CBA750 Series

Brands by name

Popular brands

Cradlepoint CBA750 Series, User Manual

Search results

Summary of Contents for CBA750 Series

Reviews:

Related manuals for CBA750 Series

Brands by name

Popular brands