Cradlepoint CBA750 Series User Manual Download

Page: 52 / 89

CRADLEPOINT

CBA750 | USER MANUAL Firmware ver. 1.9.0

CRADLEPOINT, INC. PLEASE VISIT

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 50

6.3 Firmware

Use the Firmware Upgrade sub-menu to update your router to the latest
firmware to improve functionality and performance. To check for the
latest firmware, click the

Check Online Now

button.

6.3.1

Firmware Information

This section displays the Current Firmware Version and the Latest
Firmware Version. To check for the latest version, click the

Check

Online Now for Latest Firmware Version

button. To verify the latest

firmware version, the CBA750 checks the Internet.

6.3.2

Manually Upgrade Firmware

Upload Firmware.

To update the firmware, follow these steps:

1. Click the

Browse

button to locate the update file on your

computer.

2. Once you have found the file to be used, click the

Upload

button to start the firmware update process.

3. Wait for the router to reboot.
4. Confirm updated firmware revision on the

Status → Device

Info

submenu.

6.3.3

Manually Upgrade WIMAX Modem Driver File

Upload WiMAX Modem Driver File. To update the driver follow these
steps:

1. Click the

Browse

button to locate the update file on your

computer.

2. Once you have found the file to be used, click the

Upload

button

to start the driver update process.

3. Wait for the modem to reboot.

Summary of Contents for CBA750 Series


























































































Search results

Summary of Contents for CBA750 Series

Reviews:

Related manuals for CBA750 Series

Brands by name

Popular brands

Cradlepoint CBA750 Series, User Manual

Search results

Summary of Contents for CBA750 Series

Reviews:

Related manuals for CBA750 Series

Brands by name

Popular brands