When other alarm devices received alarm signal, they will goes
into Slave smoke alarm sound pattern, until the Source/Master
alarm device stopped alarm;
During the unit is alarming, you can find out the Source/Master
smoke alarm , press the Test/Silence button to pause all other
interconnected alarms.
Maintenance and Cleaning
There are a few simple steps you need do to keep it working
properly.
1.
Test the alarm once a week.
2.
Do not paint the alarm. Paint will seal the vents and
interfere with the sensor’s ability to detect smoke.
3.
Never attempt to disassemble the alarm to clean inside.
This will damage the alarm.
Clean the alarm at least once a month to remove dust, dirt,
or debris.
Use a vacuum cleaner with the soft brush, vacuum all sides
and covers of smoke alarm device.
If there is a defective battery or other failures, you can refer
to “Trouble shooting” for solution, if there are still failures
during warranty, you can return to your retailer.
Replaced Battery:
1.
The low battery signal can last for maximum 30 days,
please replace the batteries in time to keep it working
properly.
2.
Battery required: standard 1.5V AA alkaline batteries.
3.
Recommended battery brand:
DURACELL ,Energizer,Golden Peak,GP, etc; if use low
quality battery, it may cause the alarm work false or
reduce service life .
4.
Correctly install the poles of the battery.
5.
Test your alarms before or after mounting it.
Trouble Shooting
Problem
Method of disposal
The alarm does not
sound when testing
1.
Please check whether the batteries be
well assembled according to the Guide
required
Red LED flashes and
the alarm delivers
one beep every 60
seconds
1.
The battery is low. Please replace the
batteries as soon as possible.
The alarm delivers
one beep every 40
seconds
1.
clean the alarm. please refer to the
“maintenance and cleaning” section.
2.
The alarm is malfunctioning. Contact
the retailer to replace it.
Nuisance alarms
triggered
intermittently or
when residents are
cooking, taking
1.
Press silence button.
2.
Clean the alarm. Please refer to the
“maintenance and cleaning” section.
3.
Move the alarm to new location.
