CPV Zurn, Manual

Page: 9 / 28

Electrofusion Welder
26/07/2011
www.LaboratoryDrainage.co.uk Pg 9
The function of the
Quick Keys is prompted on the screen.
When entering data, letters and numbers can be selected by repeatedly
pressing the same key, e.g. A B C 2 A B C 2 . After a short pause the cursor
will move to the next position.
Special characters and spaces can be selected by pressing the 1 or 0 keys.
(This is the same method used for text with mobile phones.)
QUICK START WELDING
From the main menu 2 selections are possible, A (Welding) and D
(Options) To select welding press the
A Accept Quick-Key. Then select A
for data logging off or B for data logging on. If data logging on is selected,
one can then optionally enter Operator’s Name, Location and Job
Reference by entering data and repeatedly pressing the
A Accept key
If not already connected, the display will then carry the instruction to
connect the lead and fittings.
Then select a preheat or fusion mode option (Select key)
Fusion 1.5”- 4”
Fusion 6”
Preheat 12 secs
Confirm the option required by pressing the
A
Accept Quick-Key
Note: 1.5” – 4” fittings have a set time of 120 seconds fusion and 120
seconds cooling (240 seconds shown) 6” fittings have a set time of 150
seconds fusion and 120 seconds cooling (270 seconds shown)