Electrofusion Welder
26/07/2011
www.LaboratoryDrainage.co.uk
Pg 13
Plug the USB flash memory drive into the USB connector on the side of
the welding unit.
From the main menu:
Press the
D
Quick-Key
to select options.
Press the
A
Quick-Key
to select download data.
Confirm that you want to download the data. The display will show that it
is “Enumerating the device”. While this is showing, the unit is initialising
the memory drive. The data will now be downloaded.
The display will ask if you want to reset the data log memory. Select yes
or no then disconnect the memory drive when prompted to do so.
OPTIONS
From the main menu:
Press the
D
Quick-Key
to select options.
Press the
B
Quick-Key
to select other options.
From here the time and date can be set, along with supervisor and
calibration options. These are password protected.
Use the following passwords in order to select the facility required.
Summary of Contents for Zurn
Page 1: ...Electrofusion Welder ...
Page 28: ......
