Electrofusion Welder
26/07/2011
www.LaboratoryDrainage.co.uk
Pg 8
INSTRUCTIONS FOR USE
Connect the welding unit to the correct supply voltage and switch it on.
The screen will show a welcome message along with the software version
and date.
The owner information is now shown on the display. (For information on
how to program this into the unit, see the Calibration manual.)
The main menu is now shown:
A
Welding
D
Options
During operation, except when welding, pressing the (STAR) key will
jump back to this menu.
Note:
The operation of the unit can be customised by turning features on and
off, such as data logging. This manual details all available modes and
features. For information on how to customise the welding unit see the
“Passwords” section later on in this manual.
GENERAL OPERATION
The welding unit is fitted with an alpha-numeric keypad, which is used by
the operator to input data. There are four
Quick-Keys
, acting as shortcut
keys, as follows:
A
Accept
the data entry
B
Backspace
one position
C
Clear
the input
D
Options
Summary of Contents for Zurn
Page 1: ...Electrofusion Welder ...
Page 28: ......
