CPS SC Series Installation And Operation Manual Download

Page: 4 / 65

Chapter 1 IMPORTANT SAFETY INSTRUCTIONS

(SAVE THESE INSTRUCTIONS)

Please read this user manual carefully before product installation. CPS

reserves the right to refuse warranty claims for equipment damage if the user

fails to install the equipment according to the instructions in this manual.

Warnings and symbols in this document

DANGER:

DANGER indicates a hazardous situation which, if not avoided, will

result in death or serious injury.

WARNING:

WARNING indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

CAUTION:

CAUTION indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

NOTICE:

NOTICE indicates a hazardous situation which, if not avoided, could

result in equipment working abnormally or property loss.

INSTRUCTION:

INSTRUCTION indicates important supplementary information or

provides skills or tips that can be used to help you solve a problem or

save you time.

Summary of Contents for SC Series


































































Search results

Summary of Contents for SC Series

Reviews:

Related manuals for SC Series

Brands by name

Popular brands

CPS SC Series, Installation And Operation Manual

Search results

Summary of Contents for SC Series

Reviews:

Related manuals for SC Series

Brands by name

Popular brands