2
SPECIFICATIONS
INTRODUCTION
Thank you for purchasing the CPS PROSET CR700 series unit. CPS is dedicated to give you the fastest and
most reliable equipment to meet all your commercial refrigerant recovery requirements. In doing this CPS
has integrated its latest technology and incorporated state of the art features while improving reliability and
speed. The CR700 incorporates an Exclusive CPS Designed Patent Pending compressor that maximizes speed
in both direct liquid and direct vapor recovery. The unit is equipped with a high airflow and high efficiency
condensing system to maximize vapor recovery speed. The CR700 also incorporates an automatic Low
Pressure shut off switch.
The CR700 is designed for servicing commercial and residential refrigeration systems. Simply follow the
quick start guide and turn it on. Once the recovery is complete, simply turn the center valve to the SELF-
CLEARING position. Now the unit is ready for the next type of refrigerant.
The PROSET CR700 series utilizes a 1 hp (0.85kW) patent pending oil-less compressor, non-restrictive
piston manifold valves, and high capacity condensing system.
The following are additional features:
• “On the Run” SELF-CLEARING valve. No need to turn off the unit when switching from recovery to
self-clearing.
• On board SUCTION and DISCHARGE gauges.
• 0 to 55 bar (800-psig) discharge gauge to handle R-410A.
• Small physical size.
• Automatic Low Pressure cutout switch.
• Integrated easy to use carrying handle and Safety bar.
• 550 psig High Pressure cutout switch
• Easy and secure filter accesses. No dangling filters to be damaged.
Models
Compressor Type
Dimensions
Weight
Operating Temperature Range
Power Source
Power Consumption
Suction Pressure Gauge
Discharge Pressure Gauge
Filtration
Shut-Off Valves
Construction
Overload Protection
High Pressure Shut-Off
Refrigerants
Flow Rate
(at 60hz, reduce 15% for 50hz)
Direct Vapor
Direct Liquid
Push-Pull Liquid
-30” hg to 350 psig
-1 to 34.5 bar -.1 to 3.5 MPa -30” hg to 350 psig
-76 cm hg to 35 kg/cm
-100 kPa to 3450 kPa
-76 cm hg to 35 kg/cm
0 to 800 psig
0 to 55 bar
0 to 5.5 MPa
0 to 800 psig
0 to 55 kg/cm
0 to 5500 kPa
0 to 55 kg/cm
Cleanable 100-mesh screen integrated into Suction Port
Both Suction and Discharge piston manifold valves
Heavy gauge aluminum chassis with High Density Polyethylene Case
15 amp
8 amp
15 amp
8 amp
38 bar (550 psig)
R-12, R-134a, R-401C, R-406A, R-500, R-401A
R-409A, R-401B, R-412A, R-411A, R-407D, R-22
R-411B, R-502, R-407C, R-402B, R408A, R-509
R-407A, R-404A, R-402A, R-507, R-407B, R-410A
Up to 43 kg/hr Up to 1.6 lb/min
Up to 271 kg/hr Up to 10 lb/min
Up to 542 kg/hr Up to 20 lb/min
850 W
115 V 50/60Hz 1 Ph 220-240 V 50/60 Hz 1 Ph 100 V 50/60 Hz 1 Ph 230 V 50/60 Hz 1 Ph
0°C (32°F) to 49°C (120°)
15.3 kg (34 lbs.)
20cm (8”) wide x 37cm (14.5”) long x 30.5cm (12”) high
1 HP Oil-less Reciprocating Compressor
CR700/CR700JUK*
CR700E
CR700J
CR700S
* uses same gauges as CR700E
