5.0 OPERATING THE MACHINE
5.1 General
The following information is intended to vide you with general instruction on how to perly
operate your G-210 machine. Be sure to follow all workplace safety regulations and rules when
operating the machine. Training in per techniques and methods is available through CPS and its
distributors. To find a training near you and more visit
5.2 Attaching Tooling
The G-210 Machine is fitted with one cross-complete inside the grinding head assembly
for attaching plate and tooling.
To attach the appropriate grinding tools to the G-210:
1. Make sure the handle is in the upright “locked” position. Place hands in the center of the
handlebars when lowering and raising the machine. This method increases the control
you have when maneuvering the machine.
2. Lay the machine on its back with the handle lying on the floor. This exposes the driving
plate on the underside of the machine.
3. From a standing position at the side of the upended machine, put metal bond plate on
the cross-complete (1). Turn the cross-complete in either direction to lock the plate onto
the machine
4. Place the tooling of choice securely onto the plate.
5. Return the machine to the upright position.
Warning
•
Never kneel in front of the machine
when attaching tooling or replacing
tooling.
•
Increased heating of the tooling and
equipment may occur due to
grinding speed, increase of pad
diameter, or grinding with or without
water. Wear heat-resistant gloves
when changing tooling.
1
