General Introduction
11 / 32
IMPORTANT!
If there is any problem or malfunction of the device during operation,
you can contact after-sales service center and provide the device serial
number.
Our service personnel can find out the date of production and other
necessary information quickly and provide service for you. Therefore,
please keep the nameplate complete and intact.
Storage requirements
Close the front door tightly to avoid from opening accidentally.
Storage space shall be clean and dried and be free from dust or moisture.
The temperature of the storage space shall be kept between -25
℃
and +70
℃
as shown below.
The relative humidity of the storage space shall be kept between 5% and
95%.
Schematic Diagram and Circuit Design
The basic electrical schematic diagram of CPS AC-PLC KIT-800V/US is shown in
Figure 2-5 below.
Figure 2-5 schematic diagram of CPS AC-PLC KIT-800V/US
The transformer low voltage side inputs shall be connected to the fuses in the AC-PLC
Kit. The fuses shall then be connected to the Power Line Communication (PLC)
transmitter, which can transfer the PLC signal to Modbus-RTU through which the signal
can be further sent to the FlexOM Gateway. Meanwhile, the transformer in the AC-PLC
Kit provides 110Vac and an AC-DC power supply provides 12Vdc to power the PLC
transmitter and FlexOM Gateway.
