![background image](http://html.mh-extra.com/html/cpi/aragon-125/aragon-125_manual_2675040012.webp)
23
A.OIL AND FILTER:
1.Air cleaner replacement:
z
z
Remover left side cover.
Remove attaching screws and air cleaner cover.
NOTICE:
z
z
z
z
z
Ⅶ
.PERIODICAL INSPECTOION:
For safe and comfortable riding, be sure to make
periodical inspection.
C.P.I. motorcycle distributors and service centers
provide after service, maintenance and repair for
you.
For inspection time and items, please refer to the
maintenance manual.
If the motorcycle has not been used for a long
time, it is also necessary to make periodical
inspection.
Be sure to make inspection and maintenance in 1
month or in 300km after buying the new
motorcycle.
z
z
Dirt on air cleaner is the main reason to lower
engine power and waste fuel.
If air cleaner is not placed properly, dirt will be
sucked into cylinder to cause wearing, lowering
engine power and shortening engine life.
24
z
z
z
z
filter screen. Use high-pressured air to clean.
Install oil filter and drain plug.
Fill with new oil 0.9 liter. Check with oil level
gauge. (Do not screw in the gauge when check)
Tighten up oil level gauge.
After engine becomes warm, stop running for
10-20seconds. Recheck oil volume.
NOTICE:
z
z
z
z
z
Do not let air cleaner soak in water while
washing motorcycle, or it will have bad effect in
starting.
2.Oil change and filter cleaning:
When to change oil and clean filter.
Change oil and clean filter at first 300km and
every 1,000km after.
Capacity Of Oil
Disassembly : 0.9liter
General Change : 0.75 liter
3.How to change oil and clean filter:
Remove oil level gauge. Remove drain plug to
make all the oil flow out. If engine is warm, it is
easier to make oil flow out.
Remove oil filter cap and take off spring and
z
z
Please use C.P.I exclusive oil or SAE 10W-40
oil.
Riding in the following conditions will make oil
become inferior and please change it earlier.
*
Always ride on gravel road.