background image

 

21

  G.TIRE INSPECTION: 

z

 

 

z

 

 

 

z

 

 

 

z

 

 

z

 

 

 

 

z

 

Check tire pressure if normal. 

 

Check if there is any metal trash or gravel in 
the grooves of tires. 

 

If there is any crack or wearing exceeding the 
limit, replace the tire at once. 

 

While check the tire pressure, tire must be in 
cooling state. 

 

The main reason of going crack, unstable 
handle and abnormal abrasion are caused by 
the abnormal tire pressure. 
 
Do not overload to avoid tire explosion. 
Normal Tire Pressure 
 

 

 

z

 

 

z

 

 

 

z

 

F.TURN SIGNAL LIGHT INSPECTION: 

 

Turn main switch to 

 

Operate turn signal switch to make sure if turn 
signal lights and turn signal indicators blink. 

 

Check turn signal lights if any dirt or damage. 
 

 

 

For 1 person front wheel        : 1.25kg/cm2 
For 1 person rear wheel     : 1.75kg/cm2 

 

22

.SPEEDOMETER INSPECTION: 

z

Check if speedometer works. 

For 2 people front wheel      :1.5kg/cm2 
For 2 people front wheel      :2.25kg/cm2 

 

  H.SHOCK ABSORBER INSPECTION: 

 

.BACK MIRROR INSPECTION: 

z

 

Add weight on the handle and seat, swing 
motorcycle up and down and check the front and 
rear shock absorbers if work well. 
 

.HEADLIGHT AND TAILLIGHT   

INSPECTION 

 

z

 

Turn main switch to 

. Operate headlight 

switch to check if headlight and taillight light. 
Check the lights if any dirt or damage. 

 

J.HORN INSPECTION:

 

z

  Turn main switch to “

” and press down   

horn switch button to check if the horn sounds.

z

Sit on the seat to make sure the position behind 
and check back mirror if any dirt or damage. 

 

Summary of Contents for Aragon 125
















Reviews: