CPG 351GMCPG Series User Manual Download Page 3

Page: 3 / 13

USER MANUAL

www.CookingPerformanceGroup.com

Made in China
Item # 351CLCPG15
Model # CBL15
LAVA BRIQUETTE CHARBROILER 15"
Total BTU: 40,000
Gas Type: Natural gas
Manifold Pressure: 6" WC
Orifice Size: # 36

CBL15-NG(CPG)

04.03.1317582

Arial 6.5pt

Arial Bold 9pt

Arial Bold 6.5pt

编号

内容

名称

公司LOGO

认证LOGO

大小：37.5*29毫米

大小：10*13.7毫米

大小：16.5*16毫米

文件规格明细：

Black

COLOR:

铭牌标贴(自制)

修改序列号格式

修改铭牌材质

修改铭牌尺寸

变量, 11:年份 01:月份 000001 序列号

序列号

CLEARANCE REQUIREMENTS:
Combustible Sides: 6”
Combustible Back: 6”
Serial # 1101000001

Conforms to ANSI STD Z83.11-2016 and certified to CSA 1.8 STD-2016
Conforms to NSF / ANSI STD. 4

Lancaster, Pennsylvania

135

技术要求：须符合ROHS要求

WARNING

• Equipment must be installed by a certified technician. Improper installation, adjustment,

alteration, service, or maintenance of this equipment may cause property damage or

personal injury and voids warranty.

• Carefully read and follow the installation and owner's manual prior to equipment installation or use.

• Properly attach the legs provided before appliance is permanently installed and before use.

• Use only on non-combustible countertops and away from any combustible material.

• Equipment must be installed under proper ventilation as required per local code.

• Conversion to other gas types must be performed by a certified technician only.

This appliance is equipped with a gas pressure regulator. The regulator is factory set at 6” WC for nat, or 10” WC for

propane. For your safety, call an authorized technician for any gas conversion changes. Do not attempt to make conversion

changes yourself.
Any changes made by a non-authorized technician voids warranty. This appliance has been regulated for:

Natural gas 6” WC factory setting
Propane 10” WC factory setting

Note: An authorized technician may convert this unit from one gas type to the other.
Prior to conversion, the unit must be adjusted to the correct gas pressure.

Lighting Instructions

1. Turn all knobs until they are straight up-and-down in the vertical position.

2. Turn on the main valve, and wait 10 seconds to clear the gas for first use.

3. Hold an ignition source (match) at the pilot. When the flame is established, remove the ignition source.

4. Turn the burner knobs to "HIGH". If the burner does not ignite, promptly increase gas flow by continuing to open the pilot valve.

Do this carefully. If the pilot flame appears larger than necessary, turn it down, and reset the burner ignition.

The pilot flame should be just large enough to guarantee reliable burner ignition when the knobs are in the vertical position.

Note: To turn off the pilot burner, the gas supply must first be cut off.

铝板

A6061 T=0.8

阳极发黑

SAFETY PRECAUTIONS

CAUTION:

Potential hazard or unsafe practice could result in minor or moderate injury or product or property

damage.

NOTICE:

• Local codes regarding installation vary greatly from one area to another. The National Fire Protection

Association, Inc., states in its NFPA96 latest edition that local codes are "Authority Having Jurisdiction" when it

comes to requirement for installation of equipment. Therefore, installation should comply with all local codes.

• This product is intended for commercial use only. Not for residential use.

WARNING:

• Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
• Improper installation, adjustment, alteration, service or maintenance could lead to property damage, injury or

death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing

CPG equipment. This manual must be retained for future reference.

• Instructions must be posted in a prominent location. All safety precautions must be taken in the event the user

smells gas. Safety information can be obtained from your local gas supplier.

• A factory authorized agent should handle all maintenance and repair. Prior to conducting any maintenance or

repair work contact an authorized service agency.

GAS PRESSURE:

The appliance and its individual shutoff valve (to be supplied by user) must be disconnected from the gas supply

piping system during any pressure testing of that system at test pressures in excess of 1/2 PSI (3.45 kPa). The

appliance must be isolated from the gas supply piping system by closing its individual manual shut-off valve

during any pressure testing of the gas supply piping system at test pressures equal to or less than

1/2 PSI (3.45 kPa).