Instruction manual CPL-40
8
of
19
WORKING WITH THE DIGITAL TIMER:
If you would like to set the Timer, please press button “MODE” . You should see onto the
digital lcd display, the last programmed time as “minutes: seconds” . (figure 3). In case you
agree with the timing already set, just press “START” and the mixer will begin to work and
the countdown will indicate the resting working time. When time get the 00:00 , the
planetary mixer will be automatically stopped.
Figure3
Setting the Timer:
If you need to set a different timing press for some seconds button “MODE”. You should
see the “minutes” blinking. Just pressing buttons “+” and “-“ is possible to change the mas
you prefer. Pressing once again the button “MODE” , you will be able to set “seconds” too.
To exit from setting, just press again button “MODE”. The time will stop blinking . Now
you are ready to press “start” once again and begin the working cycle.
Pay Attention:
The Best Line Planetary mixers have a mechanical variable belt drive system with 7
speeds. DO NOT CHANGE SPEEDS IF THE MIXER IS NOT RUNNING. Moving the
Speed lever while the mixer is not running, can cause serious problem on the Belt and
gears.
While the mixer is running, if you open the protection grid or move the bowl down, i twill be
automatically stopped.
Before begin to work with the planetary mixer, please check the speed lever position. To
avoid any kind of issues, we suggest to move the lever to the lower speed at every single
use. If you are going to use the Dough-Hook and the mixer start spinning at the fastest
speed, it might be broken in seconds.
