CP 2051462254, Manual

Page: 50 / 51

Test equipment/procedure
Static measurement / Dynamic measurement
c000150
Assembly line Workshop
Your actual joint
Test joint
R R
Joint Simulator for Static Transducer
Thread Transducer Model Part Number
M5 ST4001 ACS5.01 615 910 927 0
M6 ST4005 ACS6.05 615 910 928 0
M6 ST4010 ACS6.10 615 910 929 0
M8 ST4005 ACS8.05 615 910 930 0
M8 ST4010 ACS8.10 615 910 931 0
M10 ST4010 ACS10.10 615 910 932 0
M10 ST4050 ACS10.50 615 910 933 0
M12 ST4050 ACS10.50 615 910 934 0
M16 ST4050 ACS10.50 615 910 935 0
Stationary Transducer
Torque
Range ft.lb Torque
Range Nm
Model Part Number
0,7-11,1 1-15 ST4001 615 165 141 0
3,7-51,6 5-70 ST4005 615 165 142 0
7,4-110,5 10-150 ST4010 615 165 143 0
36,8-516 50-700 ST4050 615 165 144 0
In Static as well as Dynamic measurement, it is advised to double check by the use of a
Dial Indicating Torque Wrench* (direct reading) or a Torsion Static Torque Wrench**
(connected to the Delta 4000 or Sigma 2001).
For further information regarding our complete measurement range, see our general
catalogue.
2050505603 Part no
1 Issue no
C Series no
2007-01 Date
50/51 Page