CP Plus Indigo JRC-27F User Manual Download

Page: 21 / 140

•

Username

: default.

Password

: default (hidden user). Hidden user “default” is for system

interior use only and cannot be deleted. When there is no login user, hidden user “default”

automatically login. You can set some rights such as monitor for this user so that you can
view some channel view without login.

Figure 3.9

Caution

⚫

For security reason, please modify password after you first login.

⚫

Continuous five times login failure will result in account lock!

⚫

Please reboot the device or wait for 30 minutes to try again if your account has been locked.

After input corresponding user name and password, you can click OK button. System goes to the
startup wizard.

•

When there are all analog channels, the startup wizard includes Date n Time and language,
Network Test and Install Mobile App.

➢

Click OK button, you can go to General interface. See

Figure 3.10

For detailed information, please refer to chapter 4.1.5.1.

Summary of Contents for Indigo JRC-27F













































































































































Search results

Summary of Contents for Indigo JRC-27F

Reviews:

Related manuals for Indigo JRC-27F

Brands by name

Popular brands

CP Plus Indigo JRC-27F, User Manual

Search results

Summary of Contents for Indigo JRC-27F

Reviews:

Related manuals for Indigo JRC-27F

Brands by name

Popular brands