10
3.
Basic Operations
3.1.
Turn On
Plug the power supply and turn on the power supply switch. Power supply indicator light shining
indicates turning on the video recorder. After the start-up you will hear a beep sound. The default
setting of video output is multiple-window output mode. If the start-up time is within the video
setting time, the timing video recording functions will start-up automatically. Then the video
indicator light of corresponding channel is shining and the DVR (WITHOUT HDD) is working normally.
Note:
•
Make sure that the input voltage corresponds with the switch of the DVR (WITHOUT HDD)
power supply.
•
Power supply demands: 220V±10% /50Hz.
•
Suggest using the UPS to protect the power supply under allowable conditions.
3.2.
Turn Off
There are two methods to turn off the DVR (WITHOUT HDD). Entering [Main Menu] and choosing
[Shutdown] in the [Turn off the system] option is called soft switch. Pressing the power supply switch
is called hard switch.
Illumination:
•
Auto resume after power failure
If the DVR (WITHOUT HDD) is shut down abnormally, it can automatically backup video and resume
previous working status after power failure.
•
Replace the hard disk
Before replacing the hard disk, the power supply switch in the real panel must be turned off.
•
Replace the battery
Before replacing the battery, the setting information must be saved and the power supply switch in
the real panel must be turned off. The DVR (WITHOUT HDD) uses button battery. The system time
must be checked regularly. If the time is not correct you must replace the battery, we recommend
replacing the battery every year and using the same battery type.
Note: The setting information must be saved before replacing the battery otherwise information
will lose.
3.3.
System Login
When the DVR (WITHOUT HDD) boots up, the user must login and the system provides the
corresponding functions with the user preview. There are two user settings - The names are admin,
and default. Admin is the super user preview; default
’
s Permissions are preview and video playback.
User password can be revised, while their permissions can
’t
be revised; user default is the default
Summary of Contents for Indigo JRC-27F
Page 1: ...DVR WITHOUT HDD User s Manual Version 1 01...
Page 106: ...100 Figure 5 29 Figure 5 30...
Page 109: ...103 Figure 5 32 Figure 5 33...
