10
User Controls and Indicators Description
A.
7 Segment Display
: This indicates your
Heat Setting
and can be
adjusted from
1 – 6.
(The
Default Setting
is 3).
B.
ON/OFF Switch
: Press and hold for approximately three seconds to
turn
ON
or turn
OFF
the
Heated Pad
.
C.
Temperature Switch
: Press sequentially to adjust the
Heat Setting
between
1, 2, 3, 4, 5 and 6
.
Using the Appliance
1. First, ensure the
Removable Fleece Lining
(2) is positioned in the
Heated Foot Warmer
(1) with the top 3-4cm folded over as shown in
the diagram below:
2. Connect the mains plug of the
Mains Supply Cord
(5) to a convenient
wall socket.
3. Holding the top of the
Removable Liner
on both sides, carefully push
your feet down into the
Heated Foot Warmer
.
WARNING.
Take care to avoid any trip hazards when routing the cable.
4. When you are comfortable, press and hold the
ON/OFF Switch
(B) on
the
Controller
(6) until the
Display
(A) comes on (about 2-3 seconds).
5. The
Heated Pad
will turn on to the default setting
“3”
as shown in Fig 1.
6. If you wish you can warm up the
Pad
more rapidly by sequentially
pressing the
Temp Switch
(C) to change the
Heat Setting
to
“6”,
the
highest level.
NOTE:
This product warms up quite quickly so unless it is particularly
cold we suggest leaving the setting at
“3”
initially until you know
whether you need more heat or not.
7. Alternatively, you can select any of the intermediate
Heat Settings
by
again, sequentially pressing the
Temp Switch
until you reach your
desired
Heat Setting
.
Summary of Contents for 808780
Page 14: ...14 ...