C O X M O D E L S
7
Reconfi gure the Mode of the Transmitter
Unless you are fl ying in a country where Mode 1 is
prevalent, there is no reason to change the mode. If you
have decided to operate your airplane in Mode 1, perform
the following procedure to reconfi gure the transmitter.
Use a #1 Phillips screwdriver to loosen the (2) antenna
mounting screws.
Rotate the antenna upward until it is vertical.
Rotate the antenna 180°, allowing it to be folded down
the other way.
Fold the antenna back down into the other side. Reinstall
and tighten the (2) mounting screws.
Now your transmitter has been reconfi gured to operate
in Mode 1 and you will be holding the transmitter 180°
(seemingly upside down) from when it was set up in
Mode 2. The control sticks will operate the airplane
accordingly. The rest of the instructions illustrate the
transmitter confi gured in Mode 2.