6
S K Y R A N G E R
Assembling the Sky Ranger
Insert the plastic tab at the forward end of the wing into
the fuselage as shown.
Press the aft end of the wing down into position and use
the included 2
6 mm screw to secure the wing in place.
Do not over tighten the screw.
Insert the landing gear into the slot behind the battery
compartment. Be sure the gear is pressed into the slot
completely.
Install the nose gear into the slot in front of the battery
compartment.
Press the propeller onto the propeller base attached to
the motor shaft. Press fi rmly until it clicks into place. If
the propeller does not easily snap into place, rotate the
propeller slightly to align the splines on the base.