COX 16.5HP, Owner'S/Operator'S Manual

Page: 7 / 50

11 June 2015 Page 7 Rev6 05/04/13
Owners Manual for Lawn Boss Models A14011M A14111M
BEFORE EXTENDED STORAGE
BEFORE EXTENDED STORAGE BEFORE EXTENDED STORAGE
MAINTENANCE SCHEDULE
BEFORE EACH USE & EVERY 5 HOURS
BEFORE EACH USE & EVERY 5 HOURS BEFORE EACH USE & EVERY 5 HOURS
Check engine oil level, adjust if required
Check engine air cleaner foam pre-cleaner, service if required
Check engine rotating screen/finger guard, clean if required
Check operation of safety switches, service if required
Check foot brake operation
Check tyre pressures, adjust if required
Check for loose fasteners, tighten if required
Lubricate stub axles
Check mowing attachment cutter blades, bolts, nuts, disc/s,
housing, and guards for wear or damage, replace if required
Check transaxle vent cap and oil
Change engine oil - Clean machine - Lubricate as per required
DATE / / HOURS..........................DEALER................................................
EVERY 5 HOURS
EVERY 5 HOURS EVERY 5 HOURS
Check engine oil level, adjust if required
Check engine air cleaner foam pre-cleaner, service if req.
Check engine rotating screen/finger guard, clean if required
Check operation of safety switches, service if required
Check foot brake operation
Check tyre pressures, adjust if required
Check for loose fasteners, tighten if required
Lubricate stub axles
Check mowing attachment cutter blades, bolts, nuts, disc/s, housing,
and guards for wear or damage, replace if required
1 MONTH OR 5 HOURS W
1 MONTH OR 5 HOURS W 1 MONTH OR 5 HOURS W
HICH EVER OCCURS FIRST
HICH EVER OCCURS FIRST HICH EVER OCCURS FIRST
Change engine oil
Check engine air cleaner foam pre-cleaner , service if required
Check engine rotating screen/finger guard, clean if required
Check foot brake operation, adjust if required
Check operation of safety switches, service if required
Check tyre pressures, adjust if required
Lubricate stub axles
Check mowing attachment cutter blades, bolts, nuts, disc/s, housing ,
and guards for damage, replace if required
Check and adjust engine to transmission vee belt if required..
Check for loose fasteners, tighten if required
Check transmission to cutter vee belt and adjust cutter housing level if
required
DATE / / HOURS.......................CUSTOMER................................................
3 MONTH OR 25 HOURS
3 MONTH OR 25 HOURS 3 MONTH OR 25 HOURS
WHICH EVER OCCURS FIRST
WHICH EVER OCCURS FIRST WHICH EVER OCCURS FIRST
Change engine oil if operating under heavy load or high ambient tem-
perature Check engine air cleaner foam pre-cleaner, service if required *
Check engine rotating screen/finger guard, clean if required *
Check foot brake operation
Check operation of safety switches and replace if required
Check tyre pressures, adjust if required
Lubricate stub axles
Check mowing attachment cutter blades, bolts, nuts, disc/s, housing ,
and guards for wear or damage, replace if required
Check and adjust engine to transmission vee belt if required..
Check battery condition, service if required
Check transmission to cutter vee belt and adjust cutter housing level if
required
Check for loose fasteners, tighten if required
*Service more often under dusty conditions, or where air borne debris is present
*Service more often under dusty conditions, or where air borne debris is present
DATE / / HOURS..........................DEALER................................................
Change engine oil if operating under heavy load or high ambient tem-
perature
Check engine air cleaner foam pre-cleaner, service if required *
Check engine rotating screen/finger guard, clean if required *
Check foot brake operation
Check operation of safety switches and replace if required
Check tyre pressures, adjust if required
Lubricate stub axles
Check mowing attachment cutter blades, bolts, nuts, disc/s, hous-
ing ,and guards for wear or damage, replace if required
Check for loose fasteners, tighten if required
Check and adjust engine to transmission vee belt if required..
Check battery condition, service if required
Check transmission to cutter vee belt and adjust cutter housing level if
required
6 MONTH OR 50 HOURS
6 MONTH OR 50 HOURS 6 MONTH OR 50 HOURS
WHICH EVER OCCURS FIRST
WHICH EVER OCCURS FIRST WHICH EVER OCCURS FIRST