22
iAUDIO E2
+
Troubleshooting
+ My booting speed seems slower.
* When the battery is not enough or has been completely discharged.
* When the player turned off by pressing reset button.
+ I am still confused even after reading the manual.
COWON website(www.COWON.com) provides support for users of
COWON products with FAQ (Frequently Asked Questions). Users are
strongly encouraged to check out the website for further information
regarding product usages and firmware upgrades. For individual inquiries,
please contact us on-line as we will try to help you as best as we can.
+ I would like to set the device as factory default.
To delete all files in iAUDIO E2, connect it to a PC, and format them as FAT32
files. Once formatted, all files in the product will be deleted.
+ The player does not turn on.
If the battery is completely discharged, charge the battery before you start
the player. The charging time may vary depending on the battery’s discharge
status. If the player does not work at all, press the RESET button on the rear
side. For your information, RESET will just disconnect the power and does
not damage the product or delete any files stored on the device.
+ I can’t hear any sound.
Check if the volume is set to “0”. Check if there is any file available in the
player. If there is no file in the player, you will not hear any sound. Please note
that corrupted files will result in a noise or discontinued playback. Make sure
the earphones are connected properly. Impurities in the earphone jack can
cause a noise.
+ Computer cannot recognize the player when
connected.
Try the RESET button in the back. If you experience a frequent disconnection
or unstable connectivity, connect the player directly to the USB port of the
PC, rather than a separate USB hub. As COWON products use the USB
connection for the main power system, unstable power supply can cause a
connection failure..
+ Memory capacity of the player is different or smaller
than specified.
The memory capacity indicated by Windows may be different from that
indicated by the memory manufacturer. The actual capacity will be reduced
from the original size because some space of the memory should be used as
the system area for normal operation.
Summary of Contents for iAUDIO E2
Page 1: ...ver 1 4EN...
Page 5: ......
