15
iAUDIO E2
+
Music Playback and Using the Product
Basic Use
[POWER on/off and music playback]
1. You can turn on the product by pressing the POWER button on
the right. As an indication, the green LED lamp blinks momentarily
and music starts playing.
- With the power turned on, connect the earphones to the iAUDIO E2,
and then music will automatically play. Once the earphones are
removed, music playback stops.
- More than one minute after the earphones are removed, iAUDIO E2
automatically turns off.
- When there are no music files in the unit memory, the green LED
lamp will blink, and you will hear no sound.
2. iAUDIO E2 can be turned off with a beep sound by pressing the
POWER button.
[Adjusting the Volume]
- Use + and – button to adjust the volume.
- Maximum volume for iAUDIO E2 is 40.
■
Protect your hearing with iAUDIO E2’s auto volume feature.
iAUDIO E2 automatically plays music if an earphone is
connected and powered on. When the last volume setting is
higher than level 20, it will be automatically adjusted to level 20
when turned on next time. In case the volume setting was lower
than level 20, there will be no change.
[Selecting a track]
Briefly press FF/REW button to select the music track.
- Briefly press FF button to skip to next track.
- Briefly press REW button to return to the previous track, while when
the music plays for more than 5 seconds it goes back to the
beginning of the track
Summary of Contents for iAUDIO E2
Page 1: ...ver 1 4EN...
Page 5: ......
