HOW TO REGENERATE
6. When regeneration is complete after about 15
minutes, press the Reset button to reset the soft water
consumption. (When regeneration is complete, the
timer sound stops and the function selection dial turns
to “Regeneration complete”)
7.
Set the Feature selection dial to “Soft.” Then turn on the
tap and make sure that the water flow for one to two
minutes before using the softened water.
*
Water that comes out immediately after regeneration contains
regenerant, so water may not feel softened.
- Never turn off the tap during regeneration. Regeneration will not progress correctly and will
be less efficient.
- Use only dedicated regenerant. If you do not use the right regenerant, regeneration will be
less efficient.
- Do not turn the function selection dial to “Soft water” or “Tap water” during regeneration.
As regeneration will be less efficient due to this. If the dial is being turned, restart regeneration
from the beginning.
- About 4~5 times of regenerations can be done with one time regeneration material filling
depending on season or water temperature.
Tips
