10
9
HOW TO REGENERATE
1. Check the flux gauge at the front of the product to
identify whether the time to regenerate has been
reached. (This is determined by the hardness of the
water supply.)
* The flux gauge needle indicates the amount of softened water
used.
4. Put the shower hose on the floor, set the tap in the
center and turn it on.
* Put the shower head on the floor as regenerant may come through the
shower hose.
* It is recommended to use warm water when regenerating.
* Regeneration number of times could be different depending on water
temperature during regeneration, please set the tap in the center.
5. During regeneration, you will hear the sound of the
timer and regenerant will come through the shower
hose.
3. Turn the function selection dial counterclockwise to
“Regeneration”.
2. Turn off the tap.
HO
W
TO USE / HO
W
TO REGENER
ATE
H
ow t
o U
se
