HOW TO CLEAN
How to Clean Pollution Sensor (every two months)
How to Clean Front Cover
How to Clean Main Body of Product
Use a soft cloth or brush to wipe off dusts on the surface of the
front cover.
＊ Use slightly wet cloth to wipe when contamination is high
(Do not use abrasive).
Use a dry and soft cloth to wipe it.
＊ Use slightly wet cloth to wipe when contamination is high
(Do not use abrasive).
- Always unplug the power cord before cleaning.
- Do not use organic solvents (thinner, etc.), bleach, or detergents containing
chlorine or abrasives to clean the product.
- Do not immerse the product in water or spray water on it.
Tips
1. Use a soft brush or vacuum cleaner to clean the air inlet and the air
outlet of the pollution sensor.
＊ Be careful not to let dust fall inside the product when cleaning.
2. Open the pollution sensor cover at the rear top of the product. (Use the grove of the pollution
sensor’ cover to open the cover) Soak a cotton swab in water and wipe off the lens, the dust inlet
and outlet, then wipe it off with dry cotton swab to remove moisture from it.
＊ Performance of pollution detection sensor may decrease if not cleaned regularly.
＊ Clean more often in environment with heavy dust presence.
Air outlet
Air inlet
Dust outlet
Dust inlet
15
