background image

00    |    Page 32

www.covvi.com    |    Unit 4, Quayside Business Park, Leeds, LS10 1DJ    |         020 3949 9500

9.0   The COVVI Power Supply

This product uses semiconductors that can be damaged by electrostatic discharge (ESD).

9.2   Safety Precautions

CAUTION

PRECAUTIONS FOR HANDLING

ELECTROSTATIC SENSITIVE DEVICES.

Please read the following safety precautions prior to fitting the COVVI Power Supply.
•  The Power Supply should only be fitted by a certified prosthetist.
•  This product is not designed to be disassembled or serviced. COVVI Ltd. and COVVI USA INC have the 

right to void the warranty of all products that have any type of modification or damage caused by any 

unauthorised or untrained personnel. Any damage caused by intentional harm or neglect will not be 

covered under the warranty.

•  Please make sure the Power Supply is 

OFF

 before connecting/disconnecting the prosthetic device as this 

will avoid any unpredictable spikes in the electric current from the batteries. 

• Do 

NOT

 attempt to use the prosthetic device while the batteries are charging. When the batteries are 

charging, the power will automatically turn off.  If for any reason the power does not turn off while charging, 

using the prosthetic device can be potentially unsafe.

• Do 

NOT

 use the Power Supply if there is any visible sign of damage to the Power Supply charger, Power 

Plug and/or Cables.

• Do 

NOT

 expose the Power Supply to an open flame or submerge it in water. This could damage the screen 

and affect the battery’s ability to hold charge. 

• Do 

NOT

 use any solvents or abrasives to clean the Control Panel as this might damage the paint finish, 

the clarity of the screen or integrity of the silicone moulding. 

• Do 

NOT

 fit the batteries into a small, enclosed space. The batteries are designed to inflate when they fail. 

Stopping this inflation may cause the generation of excessive heat, injury, or death. 

•  Individuals who are exposed to hazardous environments that contain flammable liquid or gas should 

NOT

 

use the COVVI Power Supply when in those environments.

•  Ensure access to wall plug to enable easy isolation if required.

Summary of Contents for HAND




















































































Reviews: