Service and repair
8-12
10070389 Rev. A
Puritan Bennett™ 700 Series Ventilator System Service Manual
8.4 Shelf mount
Warning
To prevent possible personal injury, never attempt to lift the ventilator without
assistance. When lifting the ventilator, lift from the base, use assistance, and take
appropriate safety precautions.
8.4.1 Removing/installing ventilator from/to shelf mount
Remove the ventilator from the shelf mount as follows. Install by reversing removal
procedure.
1.
Using 4-mm hex driver, remove M5 x 8 screw, flat washer, and split-ring washer that
attach shelf mount to ventilator (Figure 8-8).
2.
While facing ventilator, slide ventilator to your right until interlocking rails clear slots on
shelf mount bracket (Figure 8-9).
Figure 8-8. Removing collector vial and humidifier support brackets
from shelf mount
7-00183
Bracket
Plate
Collector vial
support bracket
Slide bracket
Humidifier support
bracket (Hudson
version shown)
Bar
M5 x 20 screw
(4 PL)
M4 x 10 screw
(2 PL)
M4 flat washer
(2 PL)
M4 split-ring
washer (2 PL)
Ventilator attaching
hardware (not shown):
M5 x 10 screw
M5 flat washer
M5 split-ring washer
M5 x 10 screw (3 PL)
M5 flat washer (3 PL)
M5 split-ring washer (3 PL)
Summary of Contents for Puritan Bennett 700 Series
Page 1: ...Service Manual Puritan Bennett 700 Series Ventilator Systems TM...
Page 439: ......
