Operation
6-16
Operator's Manual
When finished, press the HOME
key to exit the User configuration menu and return to the
Main screen. On the Main screen, the new alarm limit is displayed (numerical and graphical).
6.5.4
Alarm Volume
To change the alarm volume, press the HOME
key to display the Main screen, then perform
the following navigation bar options:
In the User configuration menu, select
NEXT
to scroll to
ALARM VOLUME
. Use
INCREASE
and
DECREASE
options to adjust the volume.
When finished, press the HOME
key to exit the User configuration menu and return to the
Main screen.
Alarm Audio Off Reminder
When this feature is enabled, the monitor emits a beep (longer than the low priority alarm tone)
every 3 minutes while alarms are muted. When the monitor turns on, the feature is disabled.
By default, the Alarm audio off reminder is set to OFF.
To turn the Alarm audio off reminder on:
1.
Navigate to page 3 of the User configuration screen.
2.
Continue pressing
NEXT
until
ALARM OFF REMINDER OFF
is highlighted.
BASELINE MENU
EVENT MARK
ALARM AUDIO ON/OFF
NEXT MENU
OUTPUT SELECT
USER CONFIGURATION
TIME SCALE
NEXT MENU
NEXT
PREVIOUS
OFF
ON
NEXT
PREVIOUS
INCREASE
DECREASE
Summary of Contents for INVOS 5100C
