background image

4

Electrical Supply 

This equipment shall be operated from the type of electrical supply indicated on the equipment‘s data plate 
label.  If you are not sure that your electrical supply meets the requirements, please consult your local power 
company for advice. 
 

  

WARNING 

This product must be connected to a protective earth circuit. 

 
This equipment is supplied with a plug that has a protective earth connection.  This plug will fit only into an 
earthed electrical outlet.  This is a safety feature.  To avoid risk of electric shock, contact your electrician to 
replace the electrical outlet if you are unable to insert the plug into it.  Never use an earthed adapter plug to 
connect the product to an electrical outlet that lacks an earth connection terminal.

Use an outlet that contains surge surpression or ground fault protection. For added protection during a lightning 
storm,  or  when  the  binder  is  left  unattended  and  unused  for  long  periods  of  time,  unplug  it  from  the  wall 
socket. 

 

Product Recycling and Disposal

European Union 

 

Disposal Information 

    
 

Application of this symbol on your equipment is confirmation that you must dispose of 

this equipment in compliance with agreed national Procedures. 
 
In accordance with European legislation end of life electrical and electronic equipment 
subject to disposal must be managed within agreed procedures. 
 
Prior to disposal please contact your local dealer or Coverbind representative for end 
of life take back information. 
 
 

Other Countries 

Please contact your local waste authorities and request disposal information. 

Summary of Contents for 101 DFS


















Reviews: