Statement:
RSS-GEN 7.1.2
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce
potential radio interference to other users, the antenna type and its gain should be so chosen that
the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
This radio transmitter (identify the device by certification number, or model number if Category II)
has been approved by Industry Canada to operate with the antenna types listed below with the
maximum permissible gain and required antenna impedance for each antenna type indicated.
Antenna types not included in this list, having a gain greater than the maximum gain indicated for
that type, are strictly prohibited for use with this device.
This device has been designed to operate with the antennas listed below, and having a maximum
permissive gain of 3 dBi. Antennas not included in this list or having a gain greater than 3 dBi are
strictly prohibited for use with this device. The required antenna impedance is 50 ohms.
The antenna is sole and designed by the manufacturer.
RSS-119 3.2
As for data port, the manufacturer’s technical parameters for interfacing external data sources is
listed as follows:
(a) the input voltage (volts peak-to-peak) required from a modem for proper modulation
IS 5V
;
(b) the maximum recommended data rate
IS 9600 kb/s
; and
(c) the designed impedance for this port IS
300 ohms
.
