FIGURE 6
FIGURE 7
Step 6:
Open the front door (#5) and place the tank into the
bottom frame (#4). Secure in place by using the plastic
screw. See Figure 6.
Note:
Secure the tank in place by turning the plastic screw
clockwise as illustrated above.
Step 7:
Attach the table top (#6) to the tank by rotating
clockwise to its connector. See Figure 7.
6
Rotate
Clockwise
Caution: The Tank
must face this way.
FIGURE 8
FIGURE 9
5
4
Plastic
Screw
Step 8:
Place the glass (#15) into the steel cover.
See Figure 8.
Fire Shield
Note:
The fire shield on the
burner system must be
exposed.
Note:
The glass cannot be
exposed over top of the steel
cover surface.
15
Step 9:
Place the cover (#9) onto the table top (#6) to cover
the glass set. See Figure 9.
Note:
1. In order to protect the burner system, when the fire
is not in use and on rainy days, the cover should be
used.
2. To repair any scratches on the table top, use the
touch-up paint for table top (#16) provided.
6
9
Glass bean is also suitable for this burner systerm, if you want to burn glass bean, then please make
sure the total glass bean's weight can not exceed 12 lbs.
E-2
PAGE 5 OF 8
