background image

E-2

PAGE 7 OF 8

Very hot while in operation!

Never lean over the appliance while it is in use. 

Do not touch the stone or the spark guard while 

the appliance is in operation. Wait until the 

appliance has cooled down after use. 

Failure to comply with these instructions 

may result in serious bodily injury.

WARNING

!

Use of your appliance 

causes carbon residue 

to build up on the glass 

inhibiting the airflow and 

leading to a more yellow 

flame. Stir up the glass 

regularly to remove these 

deposits and to maintain 

a blue flame.

Step 3

Step 4

SAFETY INSTRUCTIONS

This outdoor appliance is not intended to be 

installed in or on recreational vehicles and/or boats. 

1. Only use the regulator with hose assembly 

    supplied with your appliance. A replacement 

    regulator with hose assembly must be the one 

    specified in this manual. 

2. Have your LP gas tank filled by a reputable 

    propane gas dealer and visually inspected and 

    requalified at each filling. 

3. Never fill the gas tank beyond 80 percent full. 

    Have your propane gas dealer check the release 

    valve after every filling to ensure that it remains 

    free of defects.

4. Always keep LP gas tanks in an upright position. 

    Do not store (or use) gasoline or other flammable 

    vapours and liquids in the vicinity of this appliance. 

5. LP gas tanks not connected for use must NOT be 

    stored inside of the appliance or in the vicinity of 

    this or any other gas appliance.

6. Do not subject the LP gas tank to excessive heat. 

    Never store an LP gas tank in a garage or any 

    other indoor location. Always disconnect the LP 

    gas tank first and store it safely outside. 

7. LP gas tanks must be stored outdoors in a 

    well-ventilated area and out of children’s reach. 

    Disconnected LP gas tanks must not be stored in 

    a building, garage, or any other enclosed area. 

8. When your appliance is not in use, the gas must 

    be turned off at the gas tank.

9. The regulator with hose assembly should be 

    inspected before each use. If there is excessive 

    wear, any abrasions, or if the hose is cut, it must 

    be replaced prior to use of the appliance.

10. Keep the gas regulator hose away from hot 

      surfaces. Avoid unnecessary twisting of the 

      hose. Visually inspect the hose for cuts, cracks, 

      excessive wear, or damage prior to each use of 

      the appliance. If the hose is damaged DO NOT 

      use the appliance. Call 1-877-539-7436 for an 

      authorized replacement hose. 

11. Never allow children to play near your appliance.

Warranty

 This product is covered by Courtyard Creations Inc.'s. one–year limited warranty.

 Proof of purchase (dated register receipt) is required for warranty claims. 

 It remains the customer’s responsibility for freight and packing charges to and from the service center.

Instructions for lighting and shutting down 

the appliance:

1. Read instructions before lighting.

2. Press down the control knob to " LOW ", at the 

    same time push in the ignition button and keep 

    the button depressing for 15 seconds.

3. If the burner is not lit, press down the control 

    knob and turn clockwise to the "OFF" position. 

    Repeat from step 2 after 5 minutes.

4. Adjust flame to desired height with the control 

    knob.

Yellow

Blue

Incorrect 

Flame

Correct 

Flame

The store where you made your purchase

does not stock parts for this item.  

If you need parts,

whether they are missing or damaged, 

STOP!

Missing A Part?

No Need To Go Back To

The Store

Call us between 9:00 AM and 4:30 PM

Eastern Time Monday through Friday 

For further assistance, 

please visit us at 

[email protected]

Call Toll  Free:

TEL: 1-877-539-7436

FAX: 1-877-539-7439

READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY 

SEPARATE AND IDENTIFY ALL OF THE PARTS, MAKING SURE THAT 

YOU HAVE ALL OF THE PARTS LISTED.

IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE 

PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME 

SEPARATED DURING SHIPMENT.

IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY 

PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT 

1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.

PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:

1-MODEL NUMBER OF THE PRODUCT.

2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS 

   LIST.

MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS 

PRODUCT TO THE RETAILER.    

 

Summary of Contents for TRS42GN









Reviews: