Courion iDRIVE, System Manual

Page: 5 / 64

5
ver.071217-2.10
iLEARN System Manual
iWIRE Package Provided By Courion
COURION’s Next Generation System includes the following pre-numbered and color-coded wiring
bundles -
• iWIRE Motor Wiring Bundle (#90-947400) - Four (4) wire hoistway motor cable in an amount sufficient
to wire the COURION Door Motors, Gate Drives, and Retiring Cam Motors to the iDRIVE VFD Controls
located at each floor or car top.
• iWIRE CANbus Cable (#90-947405) - Two (2) twisted pair communication wires and a drain wire in an
amount sufficient to wire the iLEARN Door Control to all iDRIVE VFD Floor an Gate Controls.
• iWIRE Hoistway Cable (#90-947409) - Five (5) shielded 16 AWG insulated power wires, one (1) yellow 18
AWG insulated wires for the CANbus Address In/Address Out Input, and three (3) black 18 AWG insulated
wires as spares.
• iWIRE Floor/Gate Wiring Bundle
(#90-947415) - Fifteen (15) 18 AWG insulated wires in an amount suf-
ficient to wire the Door Push Buttons, EUDs, and Floor Zone Switches to the iDRIVE VFD Controls located
at each floor or car top.
• iWIRE Traveling Cable (#90-947416) - Four (4) twisted pair shielded serial CANbus communication wires,
five (5) 16 AWG insulated power wires, and three (3) 18 AWG insulated wires as spares.
• iWIRE Interconnection Wiring Bundle (#90-947423) - Three (3) 16 AWG insulated power wires, and
twenty (20) 18 AWG insulated wires in an amount sufficient to run from COURION’s iLEARN Door Control
to the Elevator Control. When wiring the inter-control interface between COURION’s iLEARN Door Control
and the Elevator Control, please refer to the Elevator Control Wiring Schematics and COURION’s Inter-
control Interface Circuit Descriptions in this book for more details.
• iWIRE Hoistway Junction Box, Traveling Cable Junction Box, and Two (2) Flat Traveling Cable Grips
(#01-929200 & #01-929201)